2008/9 Schools Wikipedia Selection. Related subjects: Sports
Table tennis is a sport in which two or four players hit a lightweight, hollow ball back and forth to each other with paddles or rackets. The game takes place on a hard table divided by a net. Players must allow a ball played towards them only one bounce on their side of the table and must return it so that it bounces on the opponents' side. If the ball doesn't land on the opponent side, it is a dead ball, unless the receiving player has hit the ball before it has clearly passed the end line of the table. Play is fast and demands quick reactions. A skilled player can impart spin to the ball, which makes its bounce and reaction on the opponent paddle or racket difficult to predict or return with confidence.
Table tennis is very popular, especially in East Asia . It is among the most popular sports in the world in terms of player numbers, as well as one of the newest of the major sports.
- 乒乓球 (Pīng Pāng Qiú) is the official name for the sport in mainland China, Hong Kong, Taiwan and Macau.
- 卓球 (Takkyu) is the official name for the sport in Japan.
- 탁구 (Tak-gu) is the name for the sport in Korea.
The game is controlled by the International Table Tennis Federation (ITTF), founded in 1926.
Table tennis is a sport where two or four players hit a ball with rackets back and forth to each other on a table, in a manner similar to tennis. The rules are slightly different, but the concept is quite similar. In singles play, the serve is not required to cross from the server's right-hand court to the receiver's right-hand court (or left to left) as it is in tennis. However, serving across is required in doubles play. Ball spin, speed, placement, strategy and tactics play an important part in competitive table tennis matches. The speed of the ball can vary from slow serves with much spin to smashes that travel as fast as 112.5 kilometers per hour.
The game is played on a 274 cm × 152.5 cm × 76 cm high (9 ft × 5 ft × 30 inches high) playing surface. The International Table Tennis Federation requires an area not less than 14 m long, 7 m wide and 5 m high for competitions. No limitations in size or shape are specified. Modern rackets usually have a thin layer of rubber covering the racket's striking surface. The rubber may have pimples pointing outwards or inwards, as well as a thin layer of sponge between the plywood centre and the rubber surface. Since spin plays a large role in the modern sport of table tennis, the composition of the rubber and the combination of sponge and rubber is designed to maximize the amount of spin and speed a player can impart onto the ball. Other technological improvements include the use of carbon or other synthetic layers as part of the blade to increase the size of the sweet spot or the stiffness of the blade.
The ball used in table tennis has a diameter of 40 mm, is made of celluloid, and is completely hollow. A three star rating on a ball usually implies a top quality ball, in relation to its bounce, roundness and their respective consistency between balls of the same make and type.
The winner is the first to score 11 points, with each player alternating serves every two points. At 10-10 (or deuce) the players alternate with every serve; the winner is then the first person to gain a clear two points advantage over his opponent. The 11 point game is an International Table Tennis Federation ( ITTF) change which occurred in 2001. All games played at national level and at international tournaments (ITTF) are played to 11 points in either a best of five (5) games (preliminaries) or best of seven (7) games format (championship matches).
The game has its origins in England as an after-dinner amusement for upper-class Victorians in the 1880s. Mimicking the game of tennis in an indoor environment, everyday objects were originally enlisted to act as the equipment. A line of books would be the net, a rounded top of a Champagne cork or knot of string as the ball, and a cigar box lid as the racket.
The popularity of the game led game manufacturers to sell the equipment commercially. Early rackets were often pieces of parchment stretched upon a frame, and the sound generated in play gave the game its first nicknames of "whiff-whaff" and "Ping-pong." A number of sources indicate that the game was first brought to the attention of Hamley's of Regent Street under the name "Gossima". The name "ping-pong" was in wide use before English manufacturer J. Jaques & Son Ltd trademarked it in 1901. The name "Ping-Pong" then came to be used for the game played by the rather expensive Jaques equipment, with other manufacturers calling theirs table tennis. A similar situation came to exist in the United States where Jaques sold the rights to the "Ping-Pong" name to Parker Brothers.
The next major innovation was by James Gibb, an English enthusiast of the game, who discovered novelty celluloid balls on a trip to the U.S. in 1901 and found them to be the ideal balls for the game. This was followed by E.C. Goode who in 1903 invented the modern version of the racket by fixing a sheet of pimpled, or stippled, rubber to the wooden blade. Table tennis was growing in popularity by 1901 when table tennis tournaments were being organized, books on table tennis were being written, and an unofficial world championship was held in 1902. During the early 20th century the game was banned in Russia due to a belief that was held by the rulers at the time that playing the game had an adverse effect on players' eyesight. In 1921, the Table Tennis Association was founded in England, and the International Table Tennis Federation followed in 1926. London hosted the first official world championship in 1927. Table tennis was introduced as an Olympic sport at the Olympics in 1988.
In the 1950s rackets that used a rubber sheet combined with an underlaying sponge layer changed the game dramatically, introducing greater spin and speed. These were introduced to England by the sports goods manufacturers S.W. Hancock Ltd. and the Hancock racket gave Johnny Leach the edge when he became World Champion in 1949. The use of speed glue increased the spin and speed even further, resulting in changes to the equipment to "slow the game down."
Toward the end of 2000, the ITTF instituted several rules changes aimed at making table tennis more viable as a televised spectator sport. First, the older 38 mm balls were officially replaced by 40 mm balls. This increased the ball's air resistance and effectively slowed down the game. By that time, players had begun increasing the thickness of the fast sponge layer on their rackets, which made the game excessively fast, and difficult to watch on television. Secondly, the ITTF changed from a 21 to an 11 point scoring system. This was intended to make games more fast-paced and exciting. The ITTF also changed the rules on service to prevent a player from hiding the ball during service, in order to increase the average length of rallies and to reduce the server's advantage. Variants of the sport have emerged. "Large-ball" table tennis uses a 44 mm ball which slows down the game significantly. This has seen some acceptance by players who have a hard time with the extreme spins and speeds of the 40 mm game. The ball's mass is 2.47 grams.
There is a move towards reviving the table tennis game that existed prior to the introduction of sponge rubber. Classic table tennis or " Hardbat" table tennis players reject the speed and spin of reversed sponge rubber, preferring the 1940-60s style of no-sponge, short pimpled rubber of play which makes defense less difficult by decreasing the speed and eliminating any meaningful magnus effect of spin. Because hardbat killer shots are almost impossible to hit against a skilled player, hardbat matches focus on the strategic side of table tennis, requiring skillful maneuvering of the opponent before an attack can be successful.
The international rules specify that the game is played with a light 2.7 gram, 40 mm (formerly 38 mm) diameter ball. Generally, it is the most-used ball. The ball is required to have a coefficient of restitution of 0.94. The 40 mm ball was introduced at the 2003 World Table Tennis Championship. However, this created some controversy as the Chinese National Team argued that this was merely to give non-Chinese players a better chance of winning. A 40 mm table tennis ball is slower and spins less than a 38 mm one. The ball is made of a high-bouncing gas-filled celluloid ball, colored white or orange, with a matte finish. The choice of ball color is made according to the table colour and its surroundings. For example, a white ball is easier to see on a green or blue table than it is on a grey table. A star on the ball indicates the quality of the ball. 3 stars indicates that it is of the highest quality.
The table is 2.74 m (9 ft) long, 1.525 m (5 ft) wide, and 76 cm (30 inch) high with a Masonite or similarly manufactured timber, layered with a smooth, low- friction coating. The table or playing surface is divided into two halves by a 15.25 cm (6 inch) high net.
Players are equipped with a wooden blade covered with rubber on one or two sides depending on the grip of the player. This is called either a paddle, racket or bat depending on where in the world the game is being played. In the USA the term "paddle" is common, in Europe the term is "bat," and the official ITTF term is "racket." This section will use the ITTF term.
Table tennis regulations allow different surfaces on each side of the racket. The different types of surfaces provide various levels of spin or speed, or in some cases, nullify spin. For example, a player may have a rubber that provides much spin on one side of his racket, and no spin on the other side of the racket. By flipping the racket in play, different types of returns are possible. To help a player distinguish between different types of rubber used by his opposing player, international rules specify that one side must be red while the other side must be black. The player has the right to inspect his opponent's racket before a match to see the type of rubber used and what colour it is. Despite high speed play and rapid exchanges, a player can see clearly what side of the racket was used to hit the ball.
Recent years have seen an advancement in technology of table tennis blades. Materials of different properties may be combined with the wood in the blade to enhance its playing performance. Many blades today feature one or more carbon layers within them to enhance their ' sweet spot', and to give the player a greater margin of error when playing powerful shots. Materials incorporated into table tennis blades today include titanium, acrylate, aramids, and aluminium.
The rubber coating may be of pimpled rubber, with the pimples outward, or it may be a rubber that is composed of two materials, a sponge layer, covered by a pimpled rubber, with the pimples pointed inwards or outwards. Some rackets are not covered with rubber at all, because a "naked" racket is believed to be more resistant to a spin. However, it is illegal to use these types of racket in competition as they are not approved by the ITTF. Some types of rubbers are also not approved. Approved rubbers have the ITTF emblem on the base of the rubber.
Players have many choices and variations in rubber sheets on their racket. Although a racket may be purchased with rubber by the manufacturer, most serious tournament players will create a customized racket. A player selects a blank blade (i.e. a racket without rubber), based on his playing style. The type of wood and synthetic layers used to make up the blade will provide a slower or faster blade. The player can choose from different types of rubber sheets which will provide a certain level of spin, speed and specific playing characteristics.
Normally, a sheet of rubber is glued to a blade using rubber cement and not removed until the rubber wears out or becomes damaged. In the 1980s, a new technique was developed where the player would use a special glue called speed glue to apply the rubber every time he played. The glue would help provide more spin and speed by providing a " catapult" effect. This technique is known as "regluing" and has become a standard technique for top players.
The surface of a racket will develop a smooth glossy patina with use. The blade surface needs to be regularly cleaned to ensure it retains a high friction surface to impart spin to the ball. Players use a commercial cleaner, or just water and detergent as cleaning agents.
Racket construction and new rubber technology (skilled elite players typically select and attach the rubber to their own rackets and glue them before every match) contribute significantly to the amount of deviation from the expected ball flight path. The fairly recent development of speed glue speeds up the departure of the ball from the rubber considerably, though at the cost of some ball control.
- Different types of rubber sheets
- Inverted (non-Chinese): This is the most widely used rubber type. The surface is smooth, with the pimpled side facing inwards toward the blade. This enables the player to generate high levels of spin and speed. Spin is generated not by the action of the topsheet alone, but also by the ball sinking into the sponge and allowing greater surface area to contact the ball.
- Inverted (Chinese): Chinese rubbers typically have stickier (or "tackier") topsheets. Spin is generated mainly by the topsheet, as opposed to the sponge, which is relatively more condensed and firmer. The result is usually a far better short game and potential offensive capabilities than normal inverted, but also a less consistent defensive and/or counter play.
- Short pimples (or "pips"): Short pimples-out rubbers are usually used by close-to-the-table hitters (for example, Liu Guoliang). They do not generate as much spin as inverted rubbers, but also make the user less susceptible to the opponent's spin. Speed generated from a short pip rubber is generally greater than that of an inverted with the same sponge. Depending on the thickness of the sponge it is also possible to play a chopping game with short pimples by varying the spin of the return. Whilst blocking and attacking a "dead ball" effect is often noticed. Ding Song is an exponent of this style.
- Long pimples (or "pips"): Long pimples-out rubbers carry relatively long and soft pips. They do not have the ability to generate any real spin of their own, but feed off of the opponent's spin instead. This allows the user to confuse the opponent and upset their rhythm. Long pips rely on the opponent's oncoming spin, as they tend to "continue" the opponent's spin, by bending upon impact, rather than reversing or changing the spin, like inverted rubbers. Long pips are usually used by close-to-the-table blockers, or choppers, but, in some cases, they can be used away from the table for long distance chops. They are usually only used on the backhand side, as they offer very limited attacking capabilities. Depending on the grip of the sides of the pimples and the thickness of the sponge it is also possible to play an aggressive game with long pips, although without much spin capability.
- Anti-spin: Anti-spin rubbers may look similar to inverted ones, but their surfaces are very slick and frictionless. Like long pimples, they cannot generate much spin, but they allow the user to produce a no-spin, or "dead" ball. Anti-spin is also not very susceptible to the opponents oncoming spin, due to the low coefficient of friction of the rubber's surface, as well as the incredibly soft sponge, which is designed to cushion or absorb the speed of the ball upon impact. This is also used to confuse the opponent, and is not widely used at the international level.
In Japan, JTTA changed a policy of the glue which is used to glue rubbers and racket in September 2006. [Rules about gluing rubbers] Using glues and rubber cleaner which contains some volatile organic solvents is banned in a game place, except where allowed to use them. A game place means that all of grounds, including a parking area. On the other hand, the glues ITTF or JTTA authorized can be used in a place which is located to use them. From September 1st, no one can be allowed to use the glues that contain some volatile organic solvents.
Starting a game
In top-flight competition, service is decided by a coin toss. At lower levels it is common for one player (or the umpire/scorer) to hide the ball in one or the other hand (usually hidden under the table), allowing the other player to guess which hand the ball is in. The correct or incorrect guess gives the "winner" the option to choose to serve, or to choose which side of the table to use.
In game play, the player serving the ball commences a point. Standing behind the end of the table, with the ball in the palm of one hand - over the table's height - and the racket in the other, the server tosses the ball without spin, upward, at least sixteen centimeters (approximately 6 inches).
He or she then must hit the ball such that it bounces once on his or her half of the table, and then bounces at least one time on the opponent's half. If the ball strikes the net but does not strike the opponent's half of the table, then a point is awarded to the opponent. However, if the ball hits the net, but nevertheless goes over and bounces on the other side, it is called a let (or net-in). Play stops, and the ball must be served again with no penalty. Unlike the old service rules, where a player may only commit three lets, now a player may commit any number of lets without penalty.
If the service is "good", then the opponent must then make a "good" return — by returning the ball before it bounces on his or her side of the table a second time. Returning the serve is one of the most difficult parts of the game, as the server's first move is often the least predictable.
Hitting the ball
Any hitting of the ball must be done such that the ball passes over or around the net. If the ball is struck such that it travels around the net, but still lands on the opponent's side of the table, the hit is legal and play should be continued. If the opponent cannot return it over (or around) the net and make it bounce on your side, then you win the point.
Points are awarded to the opponent for any of several errors in play:
- Allowing the ball to bounce on one's own side twice
- Double hitting the ball. Note that the hand above the wrist is considered part of the racket and making a good return off one's hand or fingers is allowed, but hitting one's hand or fingers and subsequently hitting the racket is a double strike and an error.
- Allowing the ball to strike anything other than the racket (see above for definition of the racket)
- Causing the ball not to bounce on the opponent's half (i.e., not making a "good" return)
- Placing one's free hand on the playing surface or moving the playing surface
- Offering and failing to make a good serve (i.e., making a service toss and failing to strike the ball fairly into play)
- Making an illegal serve: (e.g., one preceded by a player's hiding the ball or his failing to toss the ball at least 16 centimeters (six inches) in the air).
- Hitting the net with racket or any body part, or moving the table.
Alternation of service
Service alternates between opponents every two points (regardless of winner of the rally) until a player reaches 11 points with at least a two-point lead, or until both players have 10 points a piece. If both players reach 10 points, then service alternates after each point, until one player gains a two-point advantage.
In doubles, service alternates every two points between sides, but also rotates between players on the same team. At the end of every two points, the receiving player becomes the server, and the partner of the serving player becomes the receiver.
In the older 21-point game system, service would alternate every 5 points. If both players reached a score of 20, then service would alternate each point until one player gains a two-point advantage. When a match point occurs the server is allowed three attempts at serving and 2 lets before he loses the point.
Series of games
After each game, players switch sides of the table and in the fifth or seventh, game "for the match", players switch sides when the first player scores 5 points, regardless of whose turn it is to serve. In competition play, matches are typically best of five or seven games.
In addition to games between individual players, pairs may also play table tennis. In doubles, all the rules of single play apply except for the following. A line painted along the long axis of the table to create doubles courts bisects the table. This line's only purpose is to facilitate the doubles service rule, which is that service, must originate from the right hand "box" in such a way that the first bounce of the serve bounces once in said right hand box and then must bounce at least once in the opponent side's right hand box (far left box for server). Play then continues normally with the exception that players must alternate hitting the ball. For example, after a player serves the receiving player make his or her return, the server's partner returns the ball and then the service receiver's partner would play the ball. The point proceeds this way until one side fails to make a legal return and the point is then awarded to the other team. Also, when the game reaches the final set, the teams must switch side and the team that receives the service must switch receiver when one of the teams reach 5 points. Singles and doubles are both played in international competition, including the Olympic Games since 1988 and the Commonwealth Games since 2002. In 2005, the ITTF announced that doubles table tennis will only be featured as a part of teams events in the 2008 Olympics.
Styles of play
Competitive table tennis players grip their rackets in a variety of ways. The manner in which competitive players grip their rackets can be classified into two major families of styles. One is described as penhold, and the other shakehand. The Laws of Table Tennis do not prescribe the manner in which one must grip the racket, and numerous variations on gripping styles exist.
- The penhold grip is so-named because one grips the racket similarly to the way one holds a writing instrument. The style of play among penhold players can vary greatly from player to player. The most popular style, usually referred to as the Chinese penhold style, involves curling the middle, ring, and fourth finger on the back of the blade. The amount of curl in the fingers can vary from clenched, to almost perfectly straight. The three fingers however, will always remain touching. Chinese penholders favour a round racket head, for a more over-the-table style of play. In contrast, another style, sometimes referred to as the Japanese penhold grip, involves splaying those three fingers out across the back of the racket. Japanese penholders will often use a square-headed racket for an away-from-the-table style of play. Penhold styles are popular among players originating from Asian regions such as China, Taiwan, Japan, and South Korea.
Traditionally, penhold players use only one side of the racket to hit the ball during normal play. The side which is in contact with the last three fingers is generally not used. However, the Chinese have developed a new technique in which a penholder utilizes both sides of the racket. This is referred to as the Reverse penhold backhand (RPB) where the player produces a stroke (most often topspin) by turning the traditional side of the racket to face him or herself, and swinging, with a backhand motion, using the opposite side of the racket. This stroke has greatly improved and strengthened the penhold style both physically and psychologically, as it eliminates the traditional penhold backhand weakness.
- The shakehand grip is so-named because one grips the racket similarly to the way one performs a handshake. The grip is sometimes colloquially referred to as a "tennis grip" or a "Western grip," although it has no correlation to the Western grip used in Tennis. The shakehand grip is most popular among players originating in Western nations. Today, though, there are many Asian players using the shakehand grip, as it can be viewed as strategically and technically superior.
Types of shots
In table tennis, the strokes break down into generally offensive (producing topspin) and defensive (producing backspin). Spin exceptions are the smash, block, and lob. The types of strokes include backhand and forehand.
- Speed drive
- These strokes differ to ones from other racket sports like tennis. The racket is primarily perpendicular to the direction of the stroke, and most of the energy applied to the ball results in speed rather than spin, creating a shot that does not arc much, but is fast enough that it can be difficult to return. A speed drive is used mostly for keeping the ball in play, applying pressure on the opponent and potentially opening up an opportunity for a more powerful attack.
- Loop drive
- essentially the reverse of the speed drive. The racket is much more parallel to the direction of the stroke ("closed") and the racket thus grazes the ball, resulting in a large amount of topspin. A good loop drive will arc quite a bit, and once striking the opponent's side of the table will jump forward, much like a kick serve in tennis. A loop drive is dangerous because of its topspin — while not as difficult to return as a speed drive, it is more likely to rebound off the opponent's racket at a very high angle, setting up an easy smash on the follow up. As the loop drive requires a lot of topspin, players generally use their entire body to generate the movement required. Variations in spin and speed add to the effectiveness of this shot.
- Chinese players categorize loop-drives in 3 variations based on trajectories:
- 1. The "Loop"
- The "Loop" produces a more pronounced loopy arc, with a higher trajectory and extreme topspin, but is typically slower.
- 2. The "Rush"
- Produces a flatter trajectory than a typical "Loop" but carries much stronger topspin than a regular speed-drive. It can be as fast as a speed-drive, and in modern table tennis has come to replace it in virtually all cases. The ball seems to "rush" forward and downward upon hitting the table (compared to the "kicking" or "jumping" actions resulted from the high-arc "Loop"), and hence the nickname.
- 3. The "Hook"
- Similar to a regular Loop, but carries a tilted topspin (or is referred as the "top-side" spin), it bounces sideways and downward upon hitting the table. Similar but stronger than the defensive "side-drive" described below.
- Chinese players categorize loop-drives in 3 variations based on trajectories:
- Counter drive
- Usually a counter attack against drives (normally high loop drives). You have to close the racket and stay close to the ball (try to predict its path). The racket is held closed and near to the ball, which is hit with a short movement "off the bounce" (before reaching the highest point) so that the ball travels faster to the other side. If performed correctly, a well-timed, accurate counter-drive can be as effective as a smash.
- Flip (or Flick in Europe)
- When a player tries to attack a ball that has not bounced beyond the edge of the table, he/she does not have the room to wind up in a backswing. The ball may still be attacked, however, and the resulting shot is called flip because the backswing is compressed into a quick wrist action. A flip is not a single stroke and can resemble either a drive or a loop in its characteristics. What identifies the stroke is instead whether the backswing is compressed into a short wrist flick. Also known as 払い "harai" in Japanese.
- "Jaunty Pirate"
- The swift perpendicular maneuver of a semicircular swing (similar to that of a jolly, or "jaunty", pirate) which results in a skewed shot to one of the opposing corners and carries a high amount of spin. Also performed in an inverted manner by beginning the perpendicular swing at the farther extrema and pulling inward.
- The offensive trump card in table tennis. A player will typically execute a smash when his or her opponent has returned a ball that bounces too high and/or too close to the net. Smashing is essentially self-explanatory — large backswing and rapid acceleration imparting as much speed on the ball as possible. The goal of a smash is to get the ball to move so quickly that the opponent simply cannot return it. Because the ball speed is the main aim of this shot, often the spin on the ball is something other than topspin. Sidespin can be used effectively with a smash to alter the ball's trajectory significantly, although most intermediate players will smash the ball with little or no spin. An offensive table-tennis player will think of a rally as a build-up to a winning smash; only a calculated series of smashes can guarantee a point against a good opponent. However, most players will be able to return at most one or two smashes consistently. Provided that the opponent is not too close to the table or too far away from the ball, a smash can be lobbed, chopped, blocked or even counter-looped, albeit with some difficulty. A player who smashes generally works out a series of smashes (and possibly drop-shots) to rush the opponent out of position, put him off balance, or both. Smashers who fail to do this find it difficult to win a point against an excellent defense.
- The slice is analogous to the speed drive in some respects — it is very simple, usually used for keeping the point alive and creating offensive opportunities. A slice resembles a tennis slice: the racket cuts underneath the ball, imparting backspin and causing the ball to float slowly to the other side of the table. While not obvious, a slice can be difficult to attack because the backspin on the ball causes it to drop toward the table upon striking the opponent's racket – in order to attack a slice, a player must lift the ball back over the net. Often, the best option is to simply slice the ball back again, which repeats and results in slicing rallies. Otherwise, another option is to flip or drive the ball, only when it is far enough away from the net. Slicing can have its advantages, but it's a shot worth avoiding. Players should only slice when their opponent makes easy mistakes. Offensive players should only slice for variation and not for general rallies. A slice can easily be counter-looped into the opposite corner, if it doesn't drop short enough on the table. The goal of most player's slice is to make it too short to be attacked upon, rather than attempting to over-spin the opponent.
- A chop or cut is the defensive, backspin counterpart to the offensive loop drive. A chop is essentially a bigger, heavier slice, taken well back from the table. The racket face points primarily horizontally, perhaps a little bit upward, and the direction of the stroke is straight down. The object of a defensive chop is to match the topspin of the opponent's shot with your own racket speed. A good chop will float nearly horizontally back to the table, in some cases having so much backspin that the ball actually rises. A chop such as this can be extremely difficult to return due to the enormous amount of backspin. Sometimes a defensive player can impart no spin on the ball during a chop, or frequently add right- or left-hand spin to the ball. This may further confuse his/her opponent. Chops are difficult to execute, but are devastating when completed properly because it takes a tremendous amount of topspin on a loop drive to return the ball back over the net.
- The block or short is a simple shot, barely worthy of being called a "stroke," but nonetheless can be devastating against an attacking opponent. A block is executed by simply putting the racket in front of the ball — the ball rebounds back toward the opponent with nearly as much energy as it came in with. This is not as easy as it sounds, because the ball's spin, speed, and location all influence the correct angle of a block. Disregarding the difficulty of a block, it is very possible for an opponent to execute a perfect loop, drive, or smash, only to have the blocked shot come back at him just as fast. Due to the power involved in offensive strokes, often an opponent simply cannot recover quickly enough, and will be unable to return his own shot blocked back to him/her. Blocks almost always produce the same spin as was received, which is nearly always topspin.
- High level players may use what is called push block or active block, adding speed to the ball (with a small topspin movement). When playing in the Penhold Grip, many players use push blocks when being pressured on the backhand. Chinese pen-hold players refer it as push-block as they literally "push" their backhand forward, instead of simply blocking it.
- Side Drive
- This spin is alternately used as a defensive and offensive maneuver. The premise of this move is to put a spin on the ball either to the right or the left of the racket. The execution of this move is similar to a slice, but to the right or left instead of down. This spin will result in the ball curving to the side but bouncing in the opposite direction when the opponent returns it. Do not attempt a right-side spin (moving your arm to the right when hitting the ball) when too close to the left side of the table, and visa versa. To return, simply execute the same sided spin as your opponent just gave you.
- The defensive lob is possibly the most visually-impressive shot in the sport of table tennis, and it is deceptive in its simplicity. To execute a lob, a defensive player first backs off the table 8-10 feet (2.5 to 3 m, advanced players sometimes go 20 feet or 6 m or more); then, the stroke itself consists of simply lifting the ball to an enormous height before it falls back to the opponent's side of the table. A lob is inherently a creative shot, and can have nearly any kind of spin you can imagine. Talented players use this fact to their advantage in order to control the point. For instance, though the opponent may smash the ball hard and fast, a good defensive lob could quite possibly be even harder to return due to the unpredictability (and heavy amounts) of the spin on the ball. Thus, though backed off the table by tens of feet and apparently running and leaping just to reach the ball, a good defensive player can still win the point using good lobs.
- Stop (or drop shot) is a high level stroke, used as another variation for close-to-table strokes (like harai and slice). You have to position the body close to the ball and just let the ball touch the racket (without any hand movement) in a way that the ball stays close to the net with almost no speed and spin and touches the other side of the table more than twice if the opponent doesn't reach it. This stroke should be used when opponents are far from the table and not prepared to get close to the table. This technique is most usually done by pen-holders and players who use long or short pimples. A very deceiving technique, this could result in the opponent failing to reach the ball after misjudging the distance of the ball. A perfectly executed stroke after a topspin sequence can win a point.
Competitive table tennis is popular in Asia and Europe and has been gaining attention in the United States. The most important international competitions are World Cup, World Championship, the Olympics and the ITTF Pro Tour, as well as continental competitions like European Championship, Euro Top-12, Asian Championship and Asian Games. China continues to dominate most world titles, while other strong teams come from East Asia and Europe including France, Germany, former Yugoslavia, Hong Kong, Japan, South Korea, Singapore, Sweden, and Taiwan.
There are also professional competitions at the clubs level. The national league of countries like China, Germany, France, Belgium and Austria are some of the examples being at the highest level. There are also some important international club teams competitions such as the European Champions League and its former competition, the European Champions Cup, which the top club teams from different European countries compete.
There are also competitions in table tennis variants: "Hardbat", in which all competitors use a racket with small pips-out rubber (sponge is not allowed); and "Large ball", where a 44 mm ball is used to decrease the speed.
An international hall of fame exists at the PDF (349 KiB). A Grand Slam is earned by a player who wins an Olympic Games gold medal, world championship title, and World Cup of Table Tennis gold medal.
In 1980, Englishman John Hilton sensationally won the European Championships with a revolutionary "combination" bat - Hilton used differing styles of rubber which meant that his opponents were constantly bamboozled into what shot he was going to play next. The rules were eventually changed as a direct result of Hilton's play so that bats had to be of differing coloured rubber on each side (Hilton's bat was always black on both sides), in order that players knew which type of rubber pimples were being used for which shot. Hilton's European victory was one of sports greatest ever upsets, with Hilton offered at odds of 1000-1 at the start of the tournament. Hilton still plays Veteran table tennis.
The International Table Tennis Federation ( ITTF): worldwide governing body with national bodies responsible for the sport in each country. There are other local authorities applicable as well.
- The European Table Tennis Union is the governing body responsible for table tennis in Europe.
- The English Table Tennis Association is the governing body responsible for table tennis in England.
- The Irish Table Tennis Association is the governing body responsible for table tennis in Ireland.
- The Scottish Table Tennis Association is the governing body responsible for table tennis in Scotland.
- The Table Tennis Association of Wales is the governing body responsible for table tennis in Wales.
- The Canadian Table Tennis Association is the governing body responsible for table tennis in Canada.
- The USA Table Tennis (USATT): national governing body for table tennis in the United States.
- The National Collegiate Table Tennis Association ( NCTTA): official governing body for collegiate table tennis in the United States.